Alternatively known as baking enamel, Trasco Stoving Enamel is an alkyd-melamine type of stoving paint. Specially formulated for coating steel drums, gas cylinders and automotive steel surfaces, Trasco Stoving Enamel allows for a shorter coating application cycle, with faster heat fusion curing and high quality performance.
Drying to a hard and glossy finish makes the Enamel (Medium Oil) suitable for coating surfaces that are outdoors or those that are subject to wear and tear and fluctuations in temperature. Our enamel coatings are available in oil-based, water-based and latex-based options.
1. 7800 Aluminium
2. 7810 White
3. 7811 Primrose
4. 7818 Pink
5. 7819 Barley
6. 7820 Light Cream
7. 7822 Mirage
8. 7825 Chrome Yellow
9. 7830 Grass Green
10. 7832 Dark Green
11. 7835 Lt. Apple Green
12. 7840 Light Blue
13. 7842 Ultra Blue
14. 7843 Sky Blue
15. 7851 Signal Red
16. 7852 Carmine Red
17. 7853 Orange
18. 7862 Dark Grey
19. 7863 Shadow Grey
20. 7865 Dove Grey
21. 7870 Burnt Sienna
22. 7879 Dark Purple
23. 7880 Purple
24. 7885 Marine Blue
25. 7890 Black
26. 7897 Golden Honey
27. 7898 Golden Brown
28. 350 White Undercoat
29. 39/53 Red Oxide
30. 39/57 Black Matt
31. RAL 9002 Grey White
32. 5029 Beige Matt
33. NP N1989D Silhoutte Grey
Two part epoxy coatings were developed for heavy duty service on metal substrates and use less energy than heat-cured powder coatings. These systems provide a tough, protective coating with excellent hardness.
Epoxy coatings are often used in industrial and automotive applications since they are more heat resistant than latex-based and alkyd-based paints. Epoxy coatings are also widely used as primers to improve the adhesion of automotive and marine paints especially on metal surfaces where corrosion (rusting) resistance is important. Epoxy resins are also used for decorative flooring applications such as terrazzo flooring, chip flooring, and colored aggregate flooring. Epoxy paints tend to deteriorate, known as “chalking out”, due to UV exposure, so is not advisable for outdoor application. Our epoxy based pre-treatment Etching primer for metal and non-ferrous metals such as galvanized iron, aluminium, zinc, copper and etc. . It provides the necessary etching on surfaces to enhance adhesion for subsequent coats.
| 1. EP-6228BK Epoxy Black Matt |
| 2. EP-6128GY Epoxy Primer Grey Base |
| 3. EP-6128GY Epoxy Hardener – |
| 4. EP-6188 Epoxy Primer Yellow (1:1) |
| 5. Epoxy Primer Yellow Primer (1:1) |
| 6. ES-6158GY Epoxy Shop Primer Yellow Primer |
| 7. EDG-6198 Etching Primer White |
| 8. EDG-6178 Etching Primer DK Grey |
| 9. Etching Activator |
